LG Electronics LHY-518 owner manual DV Record Audio, Auto Chapter, Disc Initialize

Before Operation (Continued)

DV Record Audio

You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack.

Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded while shooting is used.

On the Audio 2 setting, the overdubbed sound is used.

Disc Record Mode
VCR Record Mode
DV Record Audio	Audio 1
Auto Chapter	Audio 2

Prev. Select Close

Auto Chapter

During recording, chapter markers are added automati- cally at fixed intervals. You can set this interval to 5 min- utes or 10 minutes. To turn off automatic chapter mark- ing, select “None”.

Disc Record Mode

VCR Record Mode

DV Record Audio

Auto ChapterNone

5 Min

10 Min

Prev. Select Close

DISC

Disc Initialize

If you load a completely blank disc, the recorder will ini- tialize the disc.

DVD-R:The recorder initialize the disc to Video mode. The recording mode will always be Video mode.

DVD-RW:The Initialize menu will appear. Select “VR Mode” or “Video Mode” then press ENTER.

DVD+R: The Initialize menu will appears. Select “Yes” then press ENTER.

DVD+RW: The recorder initialize the disc to DVD+RW mode.

Also, you can format the disc from the Setup menu as below.

Disc Initialize
	Start
Disc Finalize
Disc Label
Disc Protect
AutoPlay

		Prev.	Select	Close
1	Press SETUP.
	The Setup menu appears.
2	Use v / V to select the DISC option.
	While the DISC option is selected, press B to
3 move to the second level.
4	Use v / V to select the “Disc Initialize” option.
5	Press B to move to the third level.
	“Start” icon is highlighted.

	Press ENTER.
6 Disc Initialize menu appears.
7	In case of DVD-RW, use b / B to select a desired
	Disc Initialize Mode (VR Mode or Video Mode)

then press ENTER.

In case of DVD+RW, go to step 8.

Disc Initialize

Select a mode.

VR Mode Video Mode

8 Use b / B to select “OK”, and press ENTER. It takes a few moments to format the disc.

Disc Initialize

All data on the disc will be deleted.

Proceed?

OK Cancel

Caution

If you want to change the disc format, everything recorded on the disc will be erased.

32