LG Electronics LHY-518 owner manual Reset the Recorder Combi Receiver

Troubleshooting (Continued)

Symptom	Cause	Solution
Cannot record or did not	The remaining blank space on the disc is	Use another disc.
record successfully.	insufficient.
	The source you are trying to record is copy-	You cannot record the source.
	protected.
	When setting the recording channel, the	Select the channel on the Recorder Combi
	channel is tuned on the TV’s own tuner.	Receiver’s built-in TV tuner.
	When recording to a Video mode disc, pro-	Use a VR mode formatted disc for copy-once
	grams that are copy-once protected cannot	material.
	be recorded.
Timer Recording not possi-	Clock in Recorder Combi Receiver is not set	Set clock to correct time. See “Auto Clock
ble.	to correct time.	Set” or “Manual Clock Set” on page 27.
	Timer has been programmed	Reprogram Timer. See “Timer Recording” on
	incorrectly.	page 46.
	TIMER indicator light does not appear after	Reprogram Timer.
	programming timer.
Stereo Audio Record	TV is not Stereo-compatible.	No solution.
and/or Playback not pres-	Broadcast program is not in stereo format.	No solution.
ent.
	Recorder Combi Receiver A/V Out jacks are	Make A/V connections. Stereo is available
	not connected to TV A/V In jacks.	only via A/V output from Recorder Combi
		Receiver.
	Recorder Combi Receiver Audio/Video Out is	Select AUX or A/V source as TV input.
	not selected for viewing at the TV.
	Recorder Combi Receiver’s TV audio chan-	Set TV audio channel mode to Stereo. See
		“Changing TV Audio Channel” on page 35.
	nel is set to SAP or MONO.
Remote control does not	The Remote Control is not pointed at the	Point the Remote Control at the remote sen-
work properly.	remote sensor of the Recorder Combi	sor of the Recorder Combi Receiver.
	Receiver.
	The Remote Control is too far from the	Operate the Remote Control
	Recorder Combi Receiver.	within 23 ft (7 m).
	There is an obstacle in the path of the	Remove the obstacle.
	Remote Control and the Recorder Combi
	Receiver.
	The batteries in the Remote Control are	Replace the batteries with new ones.
	weak or dead.
Radio stations cannot be	The antenna is positioned or connected	Connect the antenna securely.
tuned in.	poorly.	Adjust the antennas and connect an external
		antenna if necessary.
	The signal strength of the stations is too	Tune in the station manually.
	weak (when tuning in with automatic tuning).
	No stations have been preset or preset sta-	Preset the stations (page 68).
	tions have been cleared (when
	tuning by scanning preset stations).

Reset the Recorder Combi Receiver

If you observe any of the following symptoms...

When the Recorder Combi Receiver is plugged in, but the power will not turn on or off.

When the display window does not working.

When the Recorder Combi Receiver does not operate normally.

You can reset the Recorder Combi Receiver as follows :

Press and hold the POWER button for more than five seconds. This will force the Recorder Combi Receiver to power off. Press the POWER button again to turn the Recorder Combi Receiver back on.

Unplug the power cord and then plug the power cord again after more than five seconds.

72