30
ENG
English
Using PCoIP solution
Figure 2-5. OSD Options Menu
Configuration Window
In the Configuration window, the administrator can
access the window tabs that contain the settings to
configure and manage the portal environment.
The Configuration window has the following tabs:
ynetwork
ylabel
yConnection Management
yDiscovery
ysession
yRDP
ylanguage
yosD
yReset
yDisplay
yVMware View
Figure 2-6. Network Configuration
Each tab contains OK, Cancel and Apply buttons
to allow the administrator to apply or cancel the
modified settings.
yEnable DHCP
If the Enable DHCP option is selected, a device will
be connected to the DHCP server. that allocates
the IP address, subnet mask, gateway IP address,
and DNS server. If this option is disabled, the
above parameters must be configured manually.
yIP address
The IP Address field contains the IP address of the
device. If DHCP is disabled, this field is required.
If DHCP is enabled, this field cannot be edited.
This field must contain the correct IP address. If an
incorrect IP address is provided, an OSD message
is displayed prompting the administrator to provide
the correct the IP address.
ysubnet Mask
The Subnet Mask field contains the subnet mask
of the device. If DHCP is disabled, this field is
required. If DHCP is enabled, this field cannot be
edited. This field must have the correct subnet
mask. If an incorrect subnet mask is provided, an
OSD message is displayed prompting the adminis-
trator to provide the correct the subnet mask.
network Tab
The Network tab allows the administrator to config-
ure the portal network parameters.
ySome PCoIP devices have their password
protection disabled and can be logged into
the management web page or access the
OSD parameters without a password. The
login page and the OSD's password protec-
tion can be enabled in the PCoIP manage-
ment console.
yThe network parameters can also be con-
figured using the Webpage Administration
Interface.
noTE
Selecting one of the options will produce a settings
window.
noTE