33
ENG
English
Using PCoIP solution
Table 2-2. Peer ID Method
yEnable Discovery
If the Enable Discovery option is selected, a device
will use SLP Discovery to dynamically locate the
peer device without requiring any information about
the location of the device in the network. This
means that the configuration and maintenance
work in a complicated system can be significantly
reduced.
As SLP Discovery requires a multicast-enabled
router, the recommended search structure is DNS-
SRV Discovery.
yEnable Host Discovery
The Enable Host Discovery option allows the user
to find the host not listed in the PCoIP session
from the portal. When this option is enabled, up
to 10 available hosts can be listed, in the order
of their detection from the portal. Use the Enable
Host Discovery option when there are a relatively
small number of hosts.
ysession Type
In Session Type, the administrator can configure a
portal for the PCoIP session or the RDP session.
yIdentify Peer by
The Identify Peer By selector allows the adminis-
trator to decide whether to identify the peer device
by IP, by MAC address or by FQDN.
Table 2-2 shows the peer ID parameters that can
be used with one of the two methods. If an incor-
rect IP address or DNS name is provided, an OSD
message is displayed prompting the administrator
to correct the error.
yEnable auto-Reconnect
The Enable Auto-Reconnect option allows the por-
tal to automatically reconnect to the last connected
host when the session is closed.
Figure 2-9. Discovery Configuration Figure 2-10. Session Configuration
Discovery Tab
The Discovery tab allows the administrator to eas-
ily find a portal in the PCoIP system.
session Tab
The Session tab allows the administrator to set the
method to connect the device to a peer device.
yThe Discovery parameters can also be con-
figured using the Webpage Administration
Interface.
yThe Session parameters can also be con-
figured using the Webpage Administration
Interface.
noTE
noTE