38
ENG
English
Using PCoIP solution
yPing settings
yDestination
The IP address or FQDN to perform the ping
test.
yInterval
The interval between the ping packets.
yPacket Size
The size of the ping packet.
yPackets
ySent
The number of ping packets sent.
yReceived
The number of ping packets received.
Figure 2-19. PCoIP Processor Configuration
Figure 2-20. Ping Configuration
PCoIP Processor Tab
The PCoIP Processor tab allows the administrator
to view the portal PCoIP processor's uptime since
its last booting.
Ping Tab
The Ping tab allows the administrator to perform a
ping test to the device and check if it can reach the
overall IP network. This is useful to check whether
the device can reach the host.
yThe PCoIP Processor Uptime can also be
viewed using the Webpage Administration
Interface.
yThe Ping tab has no corresponding menu in
to the Webpage Administration Interface of
Section 1.
noTE
ybytes statistics
yBytes Sent
The Bytes Sent field shows the total number
of bytes sent in the last active session.
yBytes Received
The Bytes Received field shows the total
number of bytes received in the last active
session.
yRound Trip latency
The Round Trip Latency field shows the total
round-trip PCoIP system (e.g. from the portal to
the host, then back to the portal) and the network
latency in milliseconds (+/- 1 ms).
noTE