LG Electronics N2311AZ

ENG

English

Using PCoIP solution

yEnable VMware View

The Enable VMware View option allows the user to

configure the portal to use the VMware View Con-

nection Server.

yIdentify Connection server by

The Identify Connection Server by selector allows

the administrator to decide whether to identify the

connection manager by IP address or by FQDN. If

VMware View is disabled, this field is not required

cannot be edited.

yPort

The Port parameter allows the administrator to

specify the port to communicate with the VMware

View Connection Server.

yssl

The SSL parameter allows the administrator to

specify the SSL to communicate with the VMware

View Connection Server.

yauto Connect

The Auto Connect parameter allows the adminis-

trator to ensure that the device always automati-

cally connects to the VMware View Connection

Server when starting the portal.

yEvent log

ysession statistics

yPCoIP Processor

yPing

Each tab has the Close button to close the window.

Figure 2-15. Display Configuration

Figure 2-16. VMware View Configuration

Display Tab

The Display tab allows the user to configure the

EDID function of the monitor.

Diagnostics Window

In the Diagnostics window, the administrator can

access the window tab to diagnose the portal. The

Diagnostics window has the following tabs:

VMware View Tab

The VMware View tab allows the user to select the

device to use the VMware View Connection Server.

yThe Enable display override function can be

used when the EDID function of the monitor

is not running.

yThe VMware View parameters can also be

configured using the Webpage Administra-

tion Interface.

yTo enable the VMware View function, the

Enable Connection Management check box

in the Enable Connection Management Tab

must be deselected.

noTE