LG Electronics PJ250R manual 114

MFL62883001-Edit3-en 3/17/10 3:47 PM Page 114

APPENDIX

10. Sharpness (Command: k k)

To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64

Refer to ‘Real data mapping 1’.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

15.Treble (Command: k r) To adjust treble.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64

Refer to ‘Real data mapping 1’.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX

11. OSD Select (Command: k l)

To select OSD (On Screen Display) on/off when controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off

Data 01: OSD on

Acknowledgement [l][ ][Set ID][ ][OK][Data][x]

12. Remote Control Lock/Key Lock Mode (Command: k m)

To lock the remote control and the front panel controls on the set.

(If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.)

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

13.Balance (Command: k t) To adjust balance.

You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64

Refer to ‘Real data mapping 1’.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

14.Color Temperature (Command: x u)

To adjust color temperature.

You can also adjust Color Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data W50 : 00 ~ C50 : 64

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

16.Bass (Command: k s) To adjust bass.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64

Refer to ‘Real data mapping 1’.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

17.Abnormal State (Command: k z) To recognize an abnormal state.

Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]

Data FF: Read

Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Normal (Power on and signal exist)

Data 01: No signal (Power on)

Data 02: Turn the TV off by remote control

Data 03: Turn the TV off by sleep time function

Data 04: Turn the TV off by RS-232C function

Data 05: 5V down

Data 06: AC down

Data 08: Turn the TV off by Off time function

Data 09: Turn the TV off by Auto off function * This function is “read only”.

114