VCR Connections
1 | Locate the Antenna jack on the | |
back of your TV. Connect this to | ||
| ||
| out jack on the back of your VCR. |
Or find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment.
You may connect either the com- posite video or the
Cable TV Wall jack
the composite and the S- Video cables. In the event that you con- nect both composite and the S- Video cables, only the
RF coaxial wire (75 ohm)
Antenna
ANT IN +75 Ω
Round wire (75 ohm)
Back AV panel
MONITOR | VIDEO | VIDEO |
OUT | INPUT 2 | INPUT 1 |
Output | In |
3 4 Switch |
|
Out
Audio Video
L R
VCR
MONO
A/V cables not included with TV
VIDEO
(L)
AUDIO
(R)
To hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the Out to TV jack to the Antenna In jack on the back of your TV.
After connecting external equipment to the TV, don’t display a still picture for a long time on the screen. Doing so may damage the TV screen.
P A G E 1 1
