PULLEY, MOTOR, DAMPER
The back cover is removed.
The belt is pulled off while turning over the pulley.
The bolt is unscrewed to the shaft and then
the pulley pulled off.
(PULLEY) |
1 |
2 |
3 |
(MOTOR) |
Damper |
Hinge, |
Damper |
(DAMPER) |
Two screws are unscrewed from the bracket (Motor). The motor is pushed to arrow direction and then
it is disassembled.
(When mounting the bushing should be fit the bracket holder <Motor>)
Lay the washing machine.
The hinge (Damper) at the tub is pulled off pressing on the snaps at the sharp end. The hinge at the base is pulled off.
44
