PUMP
Pump
Outlet Hose
Tub Pump Hose
Remove the pump outlet hose.
Remove the tub pump hose.
The pump connectors are disconnected, the hose is pulled off.
Three screws are unscrewed.
The pump is disassembled to arrow direction.
HEATER
Three screws are unscrewed.
The heater M6 bolt is loosened and it is released through the tub cover.
CAUTION
When mounting the heater, the heater should be inserted the heater clip on the bottom of the tub.
THERMISTOR
Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be broken.
The thermistor should be checked it is pulled
to the rubber tightly.
45
