LG Electronics WD(M)-10220(5)FD, WD(M)-14220(5)FD, WD(M)-12220(5)FD Error Display, Symptom, Cause

7-4.ERROR DISPLAY.

If you press the Start/Pause button when an error in displayed, any error except will disappear and the machine will change into pause status.

In case of if the error is not resolved within 20 sec. In the case of other errors,

if the error is not resolved within 4 min., power will be turned off automatically and the error only will be blinked. But in the case of , power will not be turned off.

	ERROR	SYMPTOM	CAUSE
1	WATER INLET		Water has not reached to the pre-set level within 8 min. since
	ERROR		inlet valve operated, or water has not reached to the normal
			level within 25 min.
			Load is too small.
2	IMBALANCE		The appliance is tilted.
	ERROR		Laundry is gathered to one side.
			Non-distributable things are put into the drum.
3	DRAIN ERROR		Water has not drained enough within 10 min.
4	OVERFLOW		Water is automatically being pumped out because too much
	ERROR		water is in the tub.
5	SENSOR		The sensor pressure switch is out of order.
	PRESSURE
	S/W ERROR
6	DOOR OPEN		The Start/Pause button is pressed with the door open.
	ERROR		The door switch is out of order.

7HEATING

ERROR The THERMISTOR is out of order.

14