SPIN TROUBLE | NO |
|
|
| Check on the spinning, is the frequency of the |
| |||
|
|
| water level 248 or more. The frequency can be |
| |||
|
|
| checked by pressing the Opt.2 and Time Delay |
| |||
|
|
| buttons at the same timeYESon the program. | YES | |||
| 2 | 34 | When pressing Opt.2, Spin and POWER buttons at | ||||
| the same time after power off, press the Start/Pause | ||||||
1 | button 2 times, is the drumNOlow speed spin? | YES | |||||
|
| Is it disconnected, or disassembled? |
| ||||
|
| [White : 3pin( ), Red:3pin( ), Red:3pin( ), | |||||
|
| National:6pin( | )] | NO |
| ||
|
| (1) | Is it disconnected, or disassembled? |
| YES | ||
|
| [White:3pin ( ), National:4pinNO( )] |
| NO | |||
|
|
| Check the motor connector, Is the resistance of | ||||
|
|
| the terminal same as the figure? |
| |||
|
|
| MOTOR TERMINAL (1) | YESAbout 5 |
|
| |
|
|
| Resistance of terminal: | 10 |
| ||
|
|
| Replace the MAIN PWB ASSEMBLY |
|
|
Check the sensor (Pressure) or hose (Sensor). If the problem is on the sensor or the hose, replace the sensor or the hose.
Normal
Correct the connector.
Correct the connector.
Replace the STATOR ASSEMBLY (4417FA1994E)
25