LG Electronics WD(M)-12220(5)FD, WD(M)-14220(5)FD, WD(M)-10220(5)FD Error Symptom Cause, Lock

	ERROR SYMPTOM	CAUSE
8		• MAIN PWB ASSEMBLY is out of order
	CURRENT	Replace the MAIN PWB ASSEMBLY
	ERROR	• Winding in the STATOR ASSEMBLY is short-circuited.
		Replace the STATOR ASSEMBLY
		• The connector (3-pin, male, white) in the LEAD WIRE ASSEMBLY
9	LOCK	is not connected to the connector (3-pin, female, white) of
	ERROR	STATOR ASSEMBLY.
		Reconnect or repair the connector

•The electric contact between the connectors 3-pin, male, white in the LEAD WIRE ASSEMBLY and 4-pin, female, natural in the MAIN PWB ASSEMBLY is bad or unstable.

Reconnect or repair the contact in the connector

•The LEAD WIRE ASSEMBLY between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited).

Repair the damaged (open-circuited) the LEAD WIRE ASSEMBLY

•The hall sensor is out of order/defective.

Replace the STATOR ASSEMBLY

15