Control

w The display indicates c.

w The button SuperFrost flashes.

u Briefly press the SuperFrost button Fig. 2 (2) to confirm. u To switch on: Using the Up setting button, freezer

compartment Fig. 2 (5) or Down setting button, freezer compartment Fig. 2 (4), select c1.

u To switch off: Using the Up setting button, freezer compartment Fig. 2 (5) or Down setting button, freezer compartment Fig. 2 (4), select c0.

u To confirm: press SuperFrost button Fig. 2 (2).

w When the child lock symbol Fig. 2 (8) shines, the child lock is activated.

u To deactivate the set-up mode: press On/Off button, freezer compartment Fig. 2 (3).

-or-

u Wait for 5 minutes.

w The temperature is indicated again in the temperature display.

5.3 Door alarm*

For refrigerator and freezer compartment

If the door is open longer then 60 s, the audible alarm sounds. The audible alarm is automatically silenced when the door is closed.

5.3.1 Muting the door alarm*

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open.

u Press alarm button Fig. 2 (1). w The door alarm is silenced.

5.4 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.

The temperature display flashes at the same time. The cause of the temperature being too high may be:

-warm fresh food was placed inside

-too much warm ambient air flowed in when rearranging and removing food

-power failure for some time

-the appliance is faulty

The audible alarm is automatically silenced and the tempera- ture display stops flashing when the temperature is sufficiently cold again.

If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

u Check the quality of the food. Do not consume spoiled food.

5.4.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

u Press alarm button Fig. 2 (1). w The audible alarm is silenced.

5.5 Refrigerator compartment

The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door.

5.5.1 Food refrigeration

Note

The energy consumption increases and the cooling perform- ance decreases if the ventilation is inadequate.

u Always keep the air slits of the fan free.

u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appli- ance at a glance).

u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping.

u Use the front area of the refrigerator compartment floor only for briefly putting down cooled products, e.g. when rear- ranging and sorting. However do not leave cooled products there otherwise they may be pushed back or tipped over when the door is closed.

u Do not store food too close together to enable good air circulation.

u To safeguard bottles from tipping over: move the bottle holder.

5.5.2 Setting the temperature

The temperature can be set from 11 °C to 2 °C , the recom- mended temperature is 5 °C.

u For a higher temperature setting: press Up button, refriger- ator compartment Fig. 2 (10).

u For a lower temperature setting: press Down button, refrig- erator compartment Fig. 2 (9).

w The first time the button is pressed, the value set so far is indicated in the refrigerator compartment temperature display.

u To change the temperature in 1 °C steps: briefly press the button.

u To change the temperature continuously: hold down the button.

w The value is displayed flashing during the setting operation. w The actual temperature is displayed about 5 s after the last

press of a button. The temperature slowly adjusts to the new value.

5.5.3 SuperCool

With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures. Use SuperCool, to rapidly cool large amounts of food.

When SuperCool is activated, the fan runs. The appliance operates with maximum refrigeration. The noise of the refriger- ation unit may be temporarily louder as a result.

The SuperCool function uses slightly more energy.

Cooling with SuperCool

uBriefly press SuperCool button Fig. 2 (12). w The SuperCool button Fig. 2 (12) lights up.

w The cooling temperature drops to the coldest value. Super- Cool is activated.

w SuperCool is automatically deactivated after 6 to12 hours The appliance continues to operate in the energy-saving, normal mode.

To prematurely deactivate SuperCool

uBriefly press SuperCool button Fig. 2 (12). w The SuperCool button Fig. 2 (12) goes out. w SuperCool is deactivated.

5.5.4 Fan

With the fan you can rapidly cool large quantities of fresh food or achieve a relatively even distribution of temperature across all the storage levels.

The forced-air cooling is to be recommended:

11

Page 11
Image 11
Liebherr 7084284-03 installation instructions Door alarm, Temperature alarm, Refrigerator compartment

7084284-03 specifications

The Liebherr 7084284-03 is a high-quality component designed for use in various applications, particularly in the construction and material handling sectors. Known for its reliability and efficiency, this part reflects Liebherr's commitment to robust engineering and innovation.

One of the core features of the Liebherr 7084284-03 is its durability, constructed from premium materials that withstand the rigors of demanding environments. This makes it ideal for heavy-duty applications, whether used in cranes, excavators, or other machinery. The resilience of this component ensures a longer service life, reducing downtime and maintenance costs.

In terms of technology, the Liebherr 7084284-03 integrates advanced mechanical systems designed to enhance operational efficiency. It employs cutting-edge design techniques that optimize performance while minimizing wear and tear. This precision engineering contributes to the smooth operation of machinery, ensuring that tasks are completed efficiently and safely.

The component is also designed with ease of installation and maintenance in mind. Its user-friendly design allows for quick replacements or repairs, which is critical in environments where time is of the essence. Maintenance becomes straightforward, allowing operators to focus more on productivity rather than on equipment issues.

Another notable characteristic of the Liebherr 7084284-03 is its compatibility with a wide range of machinery. This versatility means that it can be integrated seamlessly into existing setups, providing a cost-effective solution for those looking to enhance their equipment's capabilities without extensive modifications.

Moreover, the component is engineered to operate under various environmental conditions, including extreme temperatures and humidity levels. Its performance is tested rigorously to ensure it meets industry standards, giving operators the confidence that it will perform reliably under any conditions.

Overall, the Liebherr 7084284-03 embodies the high standards of quality and innovation that Liebherr is known for. With its impressive features, advanced technologies, and robust characteristics, it stands out as a component that enhances the reliability and efficiency of machinery in the construction and material handling industry. As businesses seek to improve their operational capabilities, components like the Liebherr 7084284-03 are invaluable assets.