Liebherr 7084284-03 Setting the temperature in the freezer compartment, SuperFrost, Drawers

Control

5.6.3Setting the temperature in the freezer compartment

The appliance is pre-set for normal operation.

The temperature can be set between -16 °C and -26 °C / Australia model -14 °C and -26 °C, the recommended tempera- ture is -18 °C.

u To set the temperature higher: press Up button, freezer compartment Fig. 2 (5).

u To set the temperature lower: press Down button, freezer compartment Fig. 2 (4).

w When the button is pressed the first time, the previous value is indicated in the temperature display of the freezer compartment.

u To change the temperature in 1 °C steps: briefly press the button.

-or-

u To change the temperature continuously: hold down the button.

wThe value is displayed flashing during the setting operation.

wThe actual temperature is displayed about 5 s after the last press of a button. The temperature slowly adjusts to the new value.

5.6.4 SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

In addition, frozen food already in storage is given a "cold reserve". The food stays frozen longer as a result when you defrost the appliance.*

The maximum amount of fresh food which can be frozen in 24 h is indicated on the type plate under "freezing capacity ... kg/ 24h". This amount varies according to the model and climate rating.

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

You do not have to activate SuperFrost in the following cases:

-when placing frozen food in the freezer

-when freezing up to approx. 2 kg fresh food daily*

Freezing with SuperFrost

uBriefly press the SuperFrost button Fig. 2 (2) once. w The SuperFrost button Fig. 2 (2) shines.

w The freezer temperature drops, the appliance operates with maximum refrigerating performance.

For a small amount of food:

uwait about 6 h.

uPlace the fresh food in the top drawers.*

uAppliances without NoFrost: Place the fresh food in the bottom drawers.*

For the maximum amount of food:

uwait about 24 h.

uPlace wrapped food straight on the shelves and, once frozen, put it into the drawers.*

uPlace wrapped food straight onto the floor of the appliance and put it into the drawers once it has frozen.* SuperFrost is automatically deactivated. Depending on the quantity placed inside, after 30 h at the earliest, 65 h at the latest.

Freezing is concluded.

The SuperFrost button Fig. 2 (2) is dark.

The appliance continues to operate in the energy-saving,

normal mode.wwww

5.6.5 Drawers

Note

The energy consumption increases and the cooling perform- ance decreases if there is insufficient ventilation.

For appliances with NoFrost:

u Leave the bottom drawer in the appliance!

u Always keep the air slits of the fan free at the rear wall!

u To store frozen food directly on the shelves: pull the drawer forwards and lift it out.

5.6.6 Shelves

u To remove the shelf: lift up at the front and pull out.

u To put the shelf back: simply push in as far as it will go.

5.6.7 VarioSpace

Apart from being able to remove the drawers, you can also remove the shelves, creating space for large items of frozen food. Poultry, meat, large pieces of game and high bakery prod- ucts can be frozen in one piece and prepared.

u The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.

5.6.8 Information system

(1)	Fig. 28		Sausages, bread
	Ready-made meals, ice	(4)
(2)	cream	(5)	Game, mushrooms
	Pork, fish
(3)	Fruit, vegetables	(6)	Poultry, beef/veal

The figures indicate the storage time in months for several types of frozen food in each case. Storage times given are guide times.

5.6.9 Cold storage accumulators

The cold storage accumulators prevent the temperature from rising too fast in the event of power failure.

13