Life Fitness M051-00K70-C031 operation manual 10.6

LEVEL		% INCLINE	LEVEL	% INCLINE
	1	0.0 – 1.5	11	2.0	– 8.5
	2	0.0 – 2.2	12	3.0	– 9.2
	3	0.0 – 2.9	13	3.5	– 9.9
	4	0.0 – 3.6	14	5.0	– 10.6
	5	0.0 – 4.3	15	5.5	– 11.3
	6	0.0 – 5.0	16	6.5	– 12.0
	7	0.0 – 5.7	17	7.0	– 12.7
	8	0.0 – 6.4	18	8.0	– 13.4
	9	0.5 – 7.1	19	8.7	– 14.1
	10	1.5 – 7.8	20	9.0	– 15.0

SELECTING AND ADJUSTING THE HEART RATE LEVEL

When prompted by the MESSAGE CENTER, use the LEVEL or INCLINE UP/DOWN ARROW keys (left keys) to increase or decrease the target heart rate* to the desired value and press ENTER. Adjust the level as needed or desired during the work- out.

•Target heart rate: Programs that calculate a target heart rate base this number on the age of the user and the type of workout. The user accepts or adjusts the rate when setting up the workout. During the workout it self, the program reads the heart rate, which is transmitted via the heart rate chest strap or the Lifepulse system sensors; it uses this data to adjust the resistance, incline, and if necessary, decrease speed. Manually raising the rate increases the intensity of the cardiovascular exercise.

SWITCHING WORKOUTS “ON-THE-FLY”

It is possible, during a workout, to switch to another workout program. After a switch, the console retains all the progress information about the workout since its beginning. To change workouts “on the fly,” simply press the CHANGE WORK- OUT key until the desired new workout appears and press ENTER. This feature is available for all workout s except the Fit Test.

PAUSING WORKOUTS

Non-Treadmill products: To pause a workout, simply stop pedaling. The pause duration lasts 60 seconds, after which the console automatically shuts down. Resume pedaling to continue the workout or press CLEAR to view the workout sum- mary. Users can also press the PAUSE key at any point during a workout to go immediately into Pause Mode. To contin- ue the workout, press the PAUSE key a second time within the 60 second p ause duration. After 60 seconds, the pause mode expires and the workout summary appears.

Treadmills: Press the PAUSE key to stop the belt and hold the current workout. Continue the workout by pressing the PAUSE key a second time. Pressing the CLEAR key once also activates the Pause Mode.

ENDING WORKOUTS EARLY

Non-Treadmill products: To end a workout before the pre-set duration expires, press CLEAR once. The MESSAGE CENTER then displays a workout summary, which includes the distance travelled, the total calories burned, and other statistics. Press CLEAR a second time and the MESSAGE CENTER displays “SELECT WORKOUT OR PRESS QUICK START” for a new workout.

Treadmills: Press the CLEAR key once to go into Pause Mode. Press the CLEAR key twice to transition the system to the Workout Summary mode. Press the CLEAR key a third time an d the MESSAGE CENTER displays “SELECT WORK- OUT OR PRESS QUICK START” for a new workout. Pressing the ST OP key to stop the workout will transition to the W orkout Summary mode. Pulling the Emergency Stop Switch causes a rapid belt deceleration. The following message is displayed: “REPLACE EMERGENCY STOP SWITCH.” Replacing the Emergency Stop Switch causes the system to transition to the Workout Summary mode.

*Target Heart Rate (THR) is a percentage of the theoretical maximum. For example, a 40-year-old user's THR for the CARDIO workout is 144. This workout targets 80 percent of the maximum, so the equation would be (220-40)*.80=144.

16