HOW UA-787W WORKS
LifeSource® blood pressure monitors are easy to use, accurate and digitally display full measurement readouts. Our technology is based on the “oscillometric meth- od” – a noninvasive blood pressure determination. The term “oscillation” refers to any measure of vibrations caused by the arterial pulse. Our monitor examines the pulsatile pressure generated by the arterial wall as it expands and contracts against the cuff with each heartbeat.
The cuff is inflated until the artery is fully blocked. The inflation speed is maxi- mized and the pressure level is optimized by the device. The monitor takes mea- surements while the cuff is both inflating and deflating. This results in a faster measurement providing greater comfort to the user.
before you start
You must install 4 type AA (1.5 volt) batteries (alkaline batteries recommended), or use the AC Adapter (see page
1.Remove battery compartment cover by gently pushing down on arrow and sliding cover forward.
2. Put in bottom row of batteries first. Place the batteries in com- partment with positive (+) and
negative 
those indicated in the compart- 
ment. Be sure batteries make con- Step 2 
tact with compartment terminals.
3. Replace cover by sliding it into the compartment and gently pressing into place.
NOTE: Rechargeable batteries will not work with this monitor.
Step 1
Step 3
Auto Control Medical (Toll Free): |
