NovaJet 500/630/700 Series Service Manual
Remove the Service Station
SERVICE
STATION
RELEASE
TAB
Figure 5-22. Service Station Removal.
1.Place the Top Cover in the open position.
2.Move the Carriage Assembly to the left side of the Slide Shaft.
3.Reach into the Right Cover and pull back on the Service Station release tab located on the far side of the Service Station. See Figure
4.Raise the right side of the Service Station out of the Platen.
5.Lift out the left side of the Service Station from the Platen and remove the Service Station. Moving the Service Station farther to the right might be required to release the left side of the Service Station.
Install the Service Station
1.To install the Service Station, position the Service Station inside the Right Cover and place the left side of the Service Station into the Platen.
2.Push down on the right side of the Service Station until the Service Station snaps into place.
3.Slide the Carriage Assembly to the right and back into the home position. Lower the Top Cover.
