NovaJet 500/630/700 Series Service Manual
15.Fit the Compression Spring over the post at the back of the Y- Arm Assembly.
16.Fit the notch in the front end of the Frame Tensioner over the notch in the front of the
17.Depress the back of the Frame Tensioner and slip the Carriage Belt over the Servo Motor pulley. Make sure that the guides in the Carriage Belt are properly fitted over the Servo Motor pulley.
18.Gently move the Carriage Assembly from end to end and make sure that the Carriage Belt is not rubbing against any other parts.
Remove the Carriage PCB
Integrated circuits may become weakened or damaged by electrical discharge. Do not touch or work near inte- grated circuits without wearing an ESD wrist strap.
1.Perform the Carriage Assembly, Carriage Belt, and the Frame Tensioner Removal procedures to remove the Carriage Assembly from the Slide Shaft.
2.Put on an ESD wrist strap.
3.Unlock the connectors and remove all flex cables on the Carriage PCB.
