Control Panel

NovaJet 500/630/700 Series Service Manual

The paper sensor circuitry senses for the presence of loaded media. It does this automatically during the start-up and load sequences. It also constantly monitors the media during printing to determine if the media has run out.

If no paper is sensed, the paper sensor sends this information to the MPWA, which immediately begins an ‘out of paper’ subroutine. This subroutine stops the printer from printing until more media is loaded.

The sensor also checks for the size of the media loaded so it can deter- mine the proper printing parameters.

The Control Panel is located on the right side of the printer and consists of 8 variable-action control buttons and an LCD graphics display. The control buttons are assigned to different functions and are dependant upon the selections that were previously selected. There are four buttons on the left of the display and four buttons on the right, with the display showing up to eight possible selections.

Load Media	* Feed Media Menu
Cut	Setup Menu
Pause	Utility Menu
Reset

Figure 2-12. Main Menu.

Figure 2-12 shows the control panel after the printer has been turned on and completed the start up process. As seen in the figure, the control buttons are assigned to the corresponding command that is displayed closest to the physical location of the button.

2-16	Theory of Operation

Kodak 500, 630, 700 service manual Control Panel

Models: 700 500 630

Control Panel

Figure 2-12. Main Menu.

Figure 2-12 shows the control panel after the printer has been turned on and completed the start up process. As seen in the figure, the control buttons are assigned to the corresponding command that is displayed closest to the physical location of the button.