Kodak 630, 500, 700 service manual Tabs

NovaJet 500/630/700 Series Service Manual

CARRIAGE

BUSHING

LATCH

Figure 5-20. Carriage Bushing Removal.

2.Use a flat tip screwdriver to push up on the latch which holds the Carriage Bushing in place. See Figure 5-20.

3.Pull the Carriage Bushing out of the Carriage Assembly.

4.Repeat Steps 2 and 3 for the other Carriage Bushing.

TABS

Figure 5-21. Carriage Bushing Installation.

5.Orient the new Bushing as shown in Figure 5-21 so that the metal tab on top of the Bushing goes into the Carriage Assembly first.

6.Push the Bushings in until they snap into place.

7.Perform the Reinstall the Carriage Assembly, Carriage Belt, and the Frame Tensioner procedures to reinstall the Carriage Assembly if Carriage was removed.

ASSEMBLY/ DISASSEMBLY

Assembly\Disassembly 5-35