Kodak 700, 630, 500 service manual Zero Ensure Pressure is Placed on the Rear Gauge Cartridge

NovaJet 500/630/700 Series Service Manual

3.Place the test cartridge upright on a flat surface and ‘zero’ the gauge by loosening the knob near the top and turning the dial until the needle is at the ‘0’ position on the dial. Tighten the knob. See Figure 3-16.

ZERO	ENSURE PRESSURE IS
	PLACED ON THE REAR
GAUGE
	OF THE CARTRIDGE

Figure 3-16. Zeroing the Micrometer Gauge.

4.Remove the Cyan ink cartridge. Snap the test cartridge with the micrometer gauge into the position vacated by the Cyan ink cartridge. See Figure 3-17. Ensure that the micrometer can be read from the BACK of the printer.

Figure 3-17. Test Cartridge Installed.

MAINTENANCE

Maintenance 3-23