Kodak 630, 500, 700 service manual Stepper Motor Removal/Installation

NovaJet 500/630/700 Series Service Manual

ATTACH SPRING

TO POST

ON BRACKET

Figure 5-26. Stepper Motor Removal/Installation.

14.Remove the hardware securing the Stepper Motor to the Left Lower Drive Shaft Bracket and remove the Stepper Motor.

Install the Lower Roller Assembly, Stepper Motor and Vacuum Fan

1.Loosely attach the Stepper Motor to the Lower Roller bracket using Stepper Motor hardware as shown in Figure 5-26.

2.Attach the Stepper Motor tension spring to the Stepper Motor and the Lower Roller Bracket. Tighten the Stepper Motor hardware to 8 in-lb of torque.

ASSEMBLY/ DISASSEMBLY

Assembly\Disassembly 5-47