NovaJet 500/630/700 Series Service Manual

Servo Motor Winding Resistance Check

Figure 3-7. Servo Motor.

1.Disconnect the servo motor connection from J2 on the MPWA.

2.Using a standard ohmmeter or multimeter, connect the meter leads to the two wires going to the motor.

3.While manually rotating the servo motor, monitor the readings on the meter. The acceptable range is 6-30 ohms. Typically, the reading is 7-11 ohms.

4.If the measurement is found to be unsatisfactory, replace the servo motor.

3-12 Maintenance

Page 53 Page 55
Page 54
Image 54
Kodak 630, 500, 700 service manual Servo Motor Winding Resistance Check
Page 53 Page 55
Top Page Image Contents