Kodak 700, 630, 500 service manual Left Cover Assembly Removal/Installation

NovaJet 500/630/700 Series Service Manual

8.Disconnect the Display data ribbon cable connector at the J12 location on the MPCB.

9.Disconnect the Display Power Converter connector at the J10 location on the MPCB. To disconnect, grasp the Display Power Converter connector between thumb and forefinger and pull straight out.

To remove the Left Cover Assembly (non-NovaJet 750 version):

10.Open the reservoir access Door. Disconnect and remove all ink reservoirs.

Figure 5-2. Left Cover Assembly Removal/Installation.

11.With a #2 Phillips screwdriver, remove the two screws securing the Left Cover Assembly to the Left Baseplate and the two screws securing it to the Left Sideplate. See Figure 5-2.

12.Reach under the Support Bracket and depress and hold the retracting stop assembly that secures the Left Cover Assembly to the Support Bracket.

13.Carefully lift the Left Cover Assembly up and off the printer.

5-4 Assembly\Disassembly