NovaJet 500/630/700 Series Service Manual
Deadband Test | * | Deadband |
Slow Db Test |
| Slow Deadband |
Single Line Test |
|
|
All Lines Test |
| Exit |
Figure 3-25. Calibration (Deadband) Menu (500 Series).
Deadband Test | * |
Slow Db Test | Slow Deadband |
Single Line Test |
|
All Lines Test | Exit |
Figure 3-26. Calibration (Deadband) Menu (630/700 Series).
5.When the plot is complete, select “Slow Deadband” at the Calibration Menu. This brings up the options menu for the slow deadband adjustment. This menu is similiar to the menu depicted in Figure
6.Observe the plot and using either “Prev Option” or “Next Option”, rotate through the selections until the value you want is selected. Press “Ok” to accept the selection and return to the Calibration Menu.
7.Continue performing steps 4 through 6 until the slow deadband adjustment is correct.
MAINTENANCE
Maintenance
