NovaJet 500/630/700 Series Service Manual
4.Obtain the latest firmware revision, unpack the file and launch the “XXX Firmware Utility.” File names may be different then that listed above.
Click on “File”
Click on “Preferences”
Select the appropriate port that your printer is connected to (either Modem or Printer.)
Drag and Drop the XXXX.ROM file (or the latest version) into the “Spool Folder”.
Wait approximately 20 to 40 seconds later until you hear a SINGLE beep, indicating the download was successful. You may encounter a set of double beeps shortly after sending the firmware file, but you must wait until you hear the SINGLE beep.
5.After hearing the single beep, remove power from printer for
If the firmware download is not successful you may hear more than 1 beep or complete silence. Check port connections and return to step 4.