NovaJet 500/630/700 Series Service Manual
The “Current Heads (Y, M, C)” view represents the alignment of the heads as they are currently entered. This is just an overview of all heads and how they are aligned. Do not attempt to align the heads using this view.
The “Color Horizontal Head-to-Head Calibration” checks the alignment of the nozzles horizontally and allows corrections when required. Just enter the value below the set of lines that are correctly aligned. Be careful that you are aligning the correct color by observing the C (cyan), M (magenta), and Y (yellow) on the right side of the plot.
The “Color Vertical Head-to-Head Calibration” checks the alignment of the nozzles vertically and allows corrections when required. Just enter the value below the set of lines that are correctly aligned. Be careful that you are aligning the correct color by observing the C (cyan), M (magenta), and Y (yellow) on the right side of the plot.
To perform the Color Calibration:
1.Select “Utility Menu” from the Main Menu. This brings up the Utility Menu as shown in Figure 3-19.
Prime | * | Display Settings |
Access Cartridge | | Print Settings |
Color Calib Menu | | Service Menu |
Calibration Menu | | Exit |
Figure 3-20. Utility Menu.
