NovaJet 500/630/700 Series Service Manual
Figure 5-9. Cooling Fan/AC Entry Module Removal.
8.Using a 1/4” wrench or socket, disconnect the AC Entry Module ground from the ground stud on the Right Baseplate.
9.Remove the AC Entry Module by pressing in on the securing tabs until the module is released.
Install the Power Supply, Cooling Fan, and AC Entry Module
To install the Cooling Fan and AC Entry Module:
1.Insert the AC Entry Module into the AC Entry Module hole on the Right Baseplate from the back of the printer. Press in until it snaps securely into place.
2.Attach the AC Entry Module ground connection to the grounding stud on the Right Baseplate.
3.Hold the Cooling Fan into place while inserting the four bolts into the assembly. Attach the four 1/4” nuts to the bolts to secure Fan assembly. Torque to 4
