Kodak 700, 630, 500 service manual Assembly\Disassembly5

Assembly\Disassembly5

Introduction

Chapter 5 contains the procedures for removal and replacement of the NovaJet 500/630/700 printer assemblies and mechanisms. Illustra- tions are provided for clarity. Steps for each replaceable part may depend on parts already removed in previous disassembly directions. It is recommended that you read through each procedure before beginning the removal and replacement of any assemblies or mechanisms.

The following is a list of tools which are recommended to disassemble and reassemble the printer:

•#1 Phillips Torque Screwdriver

•#2 Phillips Torque Screwdriver

•#1 Slotted Torque Screwdriver

•#2 Slotted Torque Screwdriver

•#1 Phillips Screwdriver

•#2 Phillips Screwdriver

•#1 Slotted Screwdriver

•#2 Slotted Screwdriver

•Wrench, 1/4”

•Screwdriver, Socket Head, 1/4”

•Wire Cutters

•Needle Nose Pliers

•X-ACTO Knife

•ESD Wrist Strap

The following materials are also required:

•Isopropyl Alcohol

•Cotton Swabs

•Lint Free Cloth or Tissue

•Double Sided Tape (1/16” thick, 3/4” wide)

•Loctite Blackmax, P/N 200172

A Hardware Kit is available for the printers. See Chapter 6 of this manual for the part number.

ASSEMBLY/ DISASSEMBLY

5-1