System Access List
To enter the System Access List press <Ctrl> + <A> from the User Name List menu.
The System Access List displays a list of numbers representing the ports so the administrator can change access rights to the ports for the selected user. The user’s name is displayed at the top of the access list. The mouse is used to change access rights by clicking on a given number to toggle a port’s status. A user that has access to a port can connect to that port and control the CPU connected to that port when in Normal Mode.
Function:
Save the changes to the access list and return to previous mode
Exit the System Access List without saving and return to previous mode.
Keystroke:
Enter
Esc
Figure 13- System Access List screen
USER ACCESS FUNCTIONS
INTRODUCTION
The OSD menu enables a user to name the CPUs connected to the USB Wizard and connect to them using that name from a single keyboard and mouse. The OSD is positioned on the user's monitor, displaying 8 CPU names at a time. The screen can be used for switching as well as editing the CPUs’ names. Through the OSD menu, the user can operate the USB Wizard to
have the switch cycle through 2 extended modes of operation: COMMAND and SCAN . Two LEDs on the front panel indicate when these modes are enabled.
OSD Command Mode
When entering the Command Mode from the keyboard using the <Ctrl> + <`> (accent key), the OSD menu will automatically appear on the monitor in addition to illuminating the COMMAND indicator LED on the USB KVM switch. This provides a visual way to control the USB Wizard.
The list below describes the OSD Command functions available from the keyboard after entering Command Mode and while the COMMAND LED is illuminated:
Function:Keystroke:
Select the previous port
Select the next port
Enable/disable Scan Mode | Ctrl | + | S |
| |||
|
|
| Figure 14- Command Mode screen |
Enter Edit Mode | Ctrl | + | E |
|
13
