Lincoln IM985 manual Engine Controls, Glow Plug Push bUTTON

b-5 OPERATION b-5

ENGINE CONTROLS:

12. RUN/STOP SWITCH - -RUN position energizes the engine prior to starting. STOP position stops the engine. The oil pressure inter- lock switch prevents battery drain if the switch is left in the RUN position and the engine is not operating.

13. GLOW PLUG PUSH bUTTON -

•When pushed activates the glow plugs. Glow plug should not be activated for more than 20 seconds con- tinuously.

14. START PUSH bUTTON - Energizes the starter motor to crank the engine.

15.IDLER SWITCH- Has two positions as follows:

1)In the HIGH position, the engine runs at the high idle speed controlled by the engine governor.

2)In the AUTO position, the idler operates as follows:

•When switched from HIGH to AUTO or after starting the engine, the engine will operate at full speed for approximately 12 seconds and then go to low idle speed.

•When the electrode touches the work or power is drawn for lights or tools (approximately 100 Watts mini- mum), the engine accelerates and operates at full speed.

•When welding ceases or the AC power load is turned off, a fixed time delay of approximately 12 seconds starts. If the welding or AC power load is not restarted before the end of the time delay, the idler reduces the engine speed to low idle speed.

•The engine will automatically return to high idle speed when there is welding load or AC power load reapplied.

16.ENGINE HOUR METER- Displays the total time that the engine has been running. This meter is useful for scheduling prescribed maintenance.

17.CIRCUIT bREAKER- For protection of Battery Charging Circuit.

18.ELECTRIC FUEL GAUGE- The electric fuel gauge gives accurate and reliable indication as to how much fuel is in the fuel tank.

19.COOLANT TEMPERATURE GAUGE- A indica- tor of engine coolant temperature.

20.OIL PRESSURE GAUGE- A indicator of engine Oil Pressure.

21. ENGINE PROTECTION LIGHT- A warning indi- cator light for Low Oil Pressure and/or Coolant Over Temperature.The light is off when the systems are func- tioning properly. The light will come on and the engine will shutdown when there is Low Oil Pressure and/or the Coolant is Over Temperature.

Note: The light remains off when the RUN-STOP switch is in the "ON" position prior to starting the engine.However if the engine is not started within 60 seconds the light will come on. When this hap pens the RUN-STOP switch must be returned to the "OFF" position to reset the engine protection system and light.

22. bATTERY CHARGING LIGHT- A warning indica- tor light for Low/No battery charge. The light is off when the systems are functioning properly. The light will come on if there is a Low/No battery condition but the machine will continue to run.

Note: The light may or may not come on when the RUN-STOP switch is in the "ON" position. It will come on during cranking and stay on until the engine starts. After starting the engine the light will go off unless a Low/No battery charge condition exists.

AIR VANTAGE® 500 KUbOTA