ACCESSORIES
OPTIONS / ACCESSORIES
•Hand Amptrol (K963)
•Foot Amptrol (K870)
•Arc Start Switch (K814)
•Magnum Cooler Horizontal TIG Mounting Bracket (K559-2)
•Undercarriage (K932-1)
UNDERCARRIAGE FUNCTION
The Square Wave TIG 255 is designed to be used with a Lincoln K932-1 Undercarriage. Complete installation instructions are included with the K932-1 undercarriage. When the undercarriage is properly installed, the Square Wave TIG 255 lift bail is non- functional. Do not attempt to lift the power source with the undercarriage attached. The undercarriage is designed for hand moving only; mechanized towing can lead to injury and/or damage to the Square Wave TIG 255.
INSTALLATION OF FIELD INSTALLED OPTIONS
Instructions for connecting the K932-1 Undercarriage and the K559-2 Magnum Cooler Horizontal TIG Mounting Bracket are included with those accessories.
Installation of the K963 Hand Amptrol, the K814 Arc Start Switch and K870 Foot Amptrol are as follows:
Lift the Output Cover Door (if so equipped) on the Square Wave TIG 255. Feed the cable up through the strain relief holes in the base, and connect the 6-pin MS-type (Amphenol) connector to the Remote Receptacle (See Figure 2). Secure with the threaded collar.
