Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
NORMAL OPEN CIRCUIT VOLTAGE WAVEFORM
DC TIG MODE
CAUTION
HIGH VOLTAGE / HIGH FREQUENCY can damage test equipment.
•Perform all voltage and waveform checks with high frequency circuit OFF.
•Perform High Frequency Disable Procedure.
0 V
50 V | 2 ms |
This is the typical DC (+) output volt- age waveform generated from a prop- erly operating machine. Note that each vertical division represents 50 volts and that each horizontal division represents 2 milliseconds in time.
NOTE: Scope probes connected at
machine output terminals: (+) probe to electrode,
SCOPE SETTINGS
Volts/Div | 50 V/Div. |
Horizontal Sweep | 2 ms/Div. |
Coupling | DC |
Trigger | Internal |
|
|
