Linksys AG300 manual Windows 2000 or XP Instructions

ADSL Gateway

Windows 2000 or XP Instructions

1.Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. Note: The MAC address is also called the Physical Address.

2.At the command prompt, enter ipconfig /all. Then press the Enter key.

3.Write down the Physical Address as shown on your computer screen (Figure C-3); it is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters.

The MAC address/Physical Address is what you will use for MAC filtering. The example in Figure C-3 shows the Ethernet adapters’s MAC address as 00-00-00-00-00-00. Your computer will show something different.

The example in Figure C-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show something different.

Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter

Figure B-3: MAC Address/Physical Address

56

Windows 2000 or XP Instructions