Linksys HomeLink™ Series
The HomeLink Phoneline Router’s Front Panel LEDs
Power | The Power LED will light up when the HomeLink |
| Phoneline Router is powered on. Note that there is no |
| ON/OFF switch; simply plug in the power adapter. |
The LAN Indicators |
|
Link/Act | Green. The Link/Act LED serves two purposes. If the |
| LED is continuously illuminated, the HomeLink |
| Phoneline Router is successfully connected to a device. If |
| the LED is flickering, the Router is actively sending or |
| receiving data over that port. |
Full/Col | Green. The Full/Col LED also serves two purposes. If |
| this LED is continuously illuminated, the connection is |
| successfully running in Full Duplex mode. If the LED is |
| flickering, the connection is experiencing collisions. |
| Infrequent collisions are normal. If this LED is flickering |
| too often, there may be a problem with your connection. |
| Check the Troubleshooting section if you think there is a |
| problem. |
100 | Orange. The 100 LED illuminates when a successful |
| 100Mbps connection is made through the corresponding |
| port. |
Phoneline 10M Cable/DSL Router
The WAN Indicators |
|
Link | Green. The Link LED illuminates when a successful |
| connection is made between the HomeLink Phoneline |
| Router and your Broadband device or network. |
Act | Green. The Act LED flickers when the HomeLink |
| Phoneline Router is sending or receiving data over the |
| broadband port. |
Diag | Red. The Diag LED illuminates when the HomeLink |
| Phoneline Router goes through its |
| during |
| tion of the diagnosis. If this LED stays on for an abnor- |
| mally long period of time, refer to the Troubleshooting |
| section. |
The HPNA Indicators |
|
Link | A Link LED will light up when the port successfully |
| connects to your phoneline network. |
Act | Green. The Act LED flickers when the HomeLink |
| Phoneline Router is sending or receiving data over the |
| HPNA port. |
Col | If the Col LED is flickering, the connection is experienc- |
| ing collisions. Infrequent collisions are normal. If this |
| LED is flickering too often, there may be a problem with |
| your connection. Check the Troubleshooting section if |
| you think there is a problem. |
5 | 6 |
