Chapter 3
Advanced Configuration
26 hexadecimal characters in length. Valid hexadecimal characters are
TX Key. To indicate which WEP key to use, select a default Transmit (TX) Key number.
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
WEP (May affect wireless performance. WPA2 recommend- ed)
Security Mode > WEP
Encryption Select a level of WEP encryption,
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate.
NOTE: The WEP Passphrase is compatible with Linksys wireless products only. If you are use non- Linksys products, manually enter the appropriate WEP key on those devices.
WEP Key
TX Key Select which TX (Transmit) Key to use. The default is 1.
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Wireless > Wireless Mac Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
To filter wireless users by MAC Address, either permitting or blocking access, click Enabled. If you do not wish to filter users by MAC Address, select Disabled.
Access Restrictions
Block. Click this button to block wireless access from the devices listed on this screen.
Permit. Click this button to allow wireless access by the devices listed on this screen.
MAC Address Filter List
Click the Wireless Client List button to display theWireless Client List. It shows computers and other devices on the wireless network. The list can be sorted by Client Name, Interface, IP address, MAC Address, and Status. Click the Add to MAC Filter List checkbox for any device you want to add to the MAC Address Filter List. Then click the Add button. To retrieve the most
16 |
