Chapter 3
Advanced Configuration
Priority Select the appropriate priority: High, Medium, Normal, or Low.
Click the Add button to save your changes. Your new entry will appear in the Summary list.
Summary
This lists the QoS entries you have created for your applications and devices.
Priority This displays the bandwidth priority of High, Medium, Normal, or Low.
Name This displays the application, device, or port name.
Information This displays the port range or MAC address entered for your entry. If a
Remove Click this button to remove an entry. Edit Click this button to make changes..
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Administration > Management
The Administration > Management screen allows the network’s administrator to manage specific Gateway functions for access and security.
Administration > Management
Gateway Access
Local Gateway Access
To ensure the Gateway’s security, you will be asked for your User Name and password when you access the Gateway’s
Gateway Userlist Select the number of the user. The default is user 1.
Gateway User Name Enter the default Gateway User Name, admin.
Gateway Password Linksys recommends that you change the default Gateway Password, admin, to one of your choice.
For
Remote Gateway Access
Remote Management To permit remote access of the Gateway, from outside the local network, select Enable. Otherwise, keep the default, Disable.
Management Port Enter the port number that will be open to outside access.
NOTE: When you are in a remote location and wish to manage the Gateway, enter
http://<Internet_IP_address>:port. Enter the Gateway’s specific Internet IP address in place of <Internet_IP_address>, and enter the Management Port number in place of the word port.
SNMP
SNMP is a popular network monitoring and management protocol.
Device Name Enter the name of the Gateway.
SNMP To use SNMP, select Enable. Otherwise, select Disable.
GetCommunity Enter the password that allows read‑only access to the Gateway’s SNMP information.
Set Community Enter the password that allows read/write access to the Gateway’s SNMP information.
Trap Management: Trap to Enter the IP address of the remote host computer that will receive the trap messages.
26 |