Chapter 4

Advanced Configuration

will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, you specify how often you want the Gateway to check the Internet connection. The default Redial Period is

30seconds.

RFC 1483 Routed

If you are required to use RFC 1483 Routed, then select RFC 1483 Routed.

Internet Connection Type > RFC 1483 Routed

IP Settings

Your ISP provides these settings.

Internet IP Address  Enter the Gateway’s IP address, as seen from the Internet.

Subnet Mask  Enter the Gateway’s Subnet Mask, as seen from the Internet (including your ISP).

Default Gateway  Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional) DNS  Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. At least one is required.

IPoA

If you are required to use IPoA (IP over ATM), then select IPoA.

Internet Connection Type > IPoA

Wireless-G ADSL Gateway with SpeedBooster

IP Settings

Your ISP provides these settings.

Internet IP Address  Enter the Gateway’s IP address, as seen from the Internet.

Subnet Mask  Enter the Gateway’s Subnet Mask, as seen from the Internet (including your ISP).

Default Gateway  Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional) DNS  Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. At least one is required.

RFC 1483 Bridged

If you are required to use RFC 1483 Bridged, then select RFC 1483 Bridged.

Internet Connection Type > RFC 1483 Bridged

IP Settings

Select Obtain an IP Address Automatically if your ISP says you are connecting through a dynamic IP address.

If you are required to use a permanent (static) IP address to connect to the Internet, then select Use the following IP Address. Your ISP provides the settings needed for the following fields:

Internet IP Address  Enter the Gateway’s IP address, as seen from the Internet.

Subnet Mask  Enter the Gateway’s Subnet Mask, as seen from the Internet (including your ISP).

Default Gateway  Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional) DNS  Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. At least one is required.

Bridge Mode Only

If you are using your Gateway as a bridge, which makes the Gateway act like a stand-alone modem, select Bridge

Page 10
Image 10
Linksys WAG54GS manual RFC 1483 Routed, IP Settings, IPoA, RFC 1483 Bridged, Bridge Mode Only