![](/images/new-backgrounds/1205666/20566645x1.webp)
Chapter 4
Advanced Configuration
Administration > Reporting
The Gateway can keep logs of traffic and events for your Internet connection.
Administration > Log
Reporting
Log To disable the Log function, keep the default, Disable. To monitor traffic between the network and the Internet, select Enable. With logging enabled, you can choose to view temporary logs.
Denial of ServiceThresholds Enter the number of Denial of Service attacks that will trigger an
SMTP Mail Server Enter the IP address of the SMTP server.
Return
View Log To view the logs, click View Log.
Log > View Log
Log
Type Select ALL, Access Log, or Firewall Log.
Click pageRefresh to update the log. Click Clear to clearalltheinformationthatisdisplayed.Click Previous Page to view the previous page of information. Click Next Page to view the next page of information.
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Administration > Diagnostics
The ping test allows you to check the connections of your network devices, including connection to the Internet.
Administration > Diagnostics
Ping Test
Ping Test Parameters
The ping test checks the status of a connection.
Ping Target IP Enter the IP address that you want to ping. This can be either a local (LAN) or Internet (WAN) IP address.
Ping Size Enter the packet size you want to use. The default is 60 bytes.
Number of Pings Enter how many times you want to ping. The default is 1.
Ping Interval Enter the number of milliseconds between pings. The default is 1000 milliseconds.
PingTimeout Enterthenumberofmillisecondsbeforethe ping test will time out. The default is 5000 milliseconds.
Start Test To run the test, click this button. The Ping Test screen will show if the test was successful. Click Close to return to the Diagnostics screen.
22 |