Wireless-G Broadband Router with RangeBooster

The Wireless Tab - Wireless MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.

Wireless MAC Filter

To filter wireless users by MAC Address, either permitting or blocking access, click Enabled. If you do not wish to filter users by MAC Address, select Disabled.

Access Restriction

Prevent PCs listed below from accessing the wireless network. Clicking this button will block wireless access by MAC Address.

Permit PCs listed below to access the wireless network. Clicking this button will allow wireless access by MAC Address.

MAC Address Filter List

You can manually enter a MAC address to filter or you can select one from the Wireless Client List.

Wireless Client List. Click the Wireless Client MAC List button to display a list of wireless network users. From the To Sort by drop-down menu, you can sort the table by Client Name, IP Address, MAC Address, Interface, or Client Name. To add a client’s MAC Address to your MAC Address Filter list, click the Save to MAC Address Filter List checkbox and click the Add button. To view the most up-to-date information, click the Refresh button. To exit this screen, click the Close button.

Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes.

Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster

Figure 5-27: Wireless Tab - Wireless MAC Filter

Figure 5-28: Wireless Client List

22

The Wireless Tab - Wireless MAC Filter

Page 28
Image 28
Linksys WRT54GR manual Wireless Tab Wireless MAC Filter