1 Service
Parameter table B - Water Heater Operation (continued)
Table 1E_(continued from previous page) This table lists SMART SYSTEM control module parameters and where to access them for water heater operation ONLY
BMS
SERVICE NOTIFICATION PUMPS
Menu | Sub | Description | See | User Access | Installer Access | |||
Item | Page | Display | Modify | Display | Modify | |||
|
| |||||||
| 1 | BMS Type | 23 | No | No | Yes | Yes | |
| 2 | Voltage at Minimum (V at Min) | 23 | No | No | Yes | Yes | |
| 3 | Voltage at Maximum (V at Max) | 23 | No | No | Yes | Yes | |
| 4 | Minimum Power (Min Power) | 23 | No | No | Yes | Yes | |
I | 5 | Maximum Power (Max Power) | 23 | No | No | Yes | Yes | |
| 6 | Minimum Setpoint (Min Setpoint) | 23 | No | No | Yes | Yes | |
| 7 | Maximum Setpoint (Max Setpoint) | 24 | No | No | Yes | Yes | |
| 8 | Voltage to Start CFH (V at Start) | 24 | No | No | Yes | Yes | |
| 9 | Voltage Differential Stop CFH (V Diff Stop) | 24 | No | No | Yes | Yes | |
J | 1 | DHW Pump Delay (DHW Pump Dlay) | 24 | No | No | Yes | Yes | |
| 1 | Service Interval Time (months) (Srv Int Time) | 24 | No | No | Yes | Yes | |
|
|
|
|
|
|
|
| |
| 2 | Service Interval Run (Srv Int Run) | 24 | No | No | Yes | Yes | |
K | 3 | Service Interval Operation (hours) (Srv Int Op) | 24 | No | No | Yes | Yes | |
| 4 | Reset Service | 24 | No | No | Yes | Yes | |
| 5 | Accept Personality Plug (Accept PPlug) | 24 | No | No | Yes | Yes | |
|
|
|
|
|
|
|
| |
16 
