Initial installation
Explanations of the setting possibilities:
Location Select the country for
Antenna | Antenna/cable (analogue): analogue stations via | |
selection | cable/antenna | |
| digital, terrestrial stations | |
|
| digital stations via cable |
|
| digital stations via satellite |
| digital stations via satellite | |
If you are using an active antenna, then select yes (5V) | ||
Antenna | for the antenna power supply. | |
The conventional settings will be derived from the selec- | ||
Settings | tion of set location. Only change this if you know other | |
| symbol rates and modulation types or if you have to spe- | |
| cify the network ID for your cable network (information | |
| available from your cable network provider). If you want | |
| to run the station search independently of the channel | |
| grid, select frequency search for the search method. | |
Satellite | than one satellite, select the type of your changeover | |
system | switch or communal satellite system additionally. | |
| Ask your dealer in this regard. | |
High band | Specify here whether the high band of the selected satel- | |
| lite is to be searched in addition to the low band. | |
LNC | Normally, you do not need to change the values for high | |
frequencies | and low band, unless the LNC (LNB) of your satellite | |
Low Band / | system uses a different oscillator frequency (important | |
High Band | for the frequency display). | |
| After you have made these settings, you should receive | |
| the picture and sound of the selected satellites (only with | |
| Astra1 and HOTBIRD). |
|
Symbol rates | The symbol rates are specified by the satellite provider | |
| and normally do not need to be changed. | |
Favoured | Select the signal source that provides the stations to be on | |
signal source | top of your station list (starting with station slot 1). | |
Start search Start the automatic station search with OK.
First TV stations, then radio stations are searched for.
The stations found in the automatic search are divided into the appropriate station blocks depending on the previously selected antenna cables (signal sources). Sub- sequently the stations can only be
Any mixed sorting of stations from different signal sources is only possible with the favourites list.
Connecting In conclusion the connection wizard and the sound com- additional ponents wizard will start; with their help you can register devices and set your video devices, decoders, speaker system, or a HiFi/AV amplifier and connect them to the TV set.
DVD players and DVD recorders are already registered at the factory.
You can start the connection wizard and the sound components wizard manually later and add new devices. Further information is available from page 35 (Connection wizard) and page 39 (Sound components wizard).
Digital Link If you have registered and connected a recorder in the Plus connection wizard, the Digital Link Plus transmission begins at the end of the sound components wizard. If a Digital Link Plus capable recorder is connected, the station list of the analogue stations is transmitted to the
external recorder.
You can also call Digital Link Plus under TV menu → Con- nections → Digital Link Plus.
If you have not connected a Digital Link Plus capable recorder, you can abort the transmission.
Explanations of the DVB-T antenna:
Room | With good reception conditions a room antenna can be |
antenna | used for |
Active | Under less favourable reception conditions, it is advisable |
antenna | to use an active antenna which has to be set accordingly |
| in the initial installation or in the TV menu → Connections |
| → Antenna DVB → Antenna |
| on this page). |
Unidirectional | If the location is outside of the normal transmission |
antenna | range then a directional antenna can be used to improve |
| reception quality. |
- 12
