Loewe Spheros R 32 HD+ manual Conditional Access Module CA module, Calling CA module information

Models: Spheros R 37Full-HD+ Spheros R 32 HD+

1 60
Download 60 pages 18.75 Kb
Page 32
Image 32
Conditional Access Module (CA module)

DVB

Conditional Access Module (CA module)

In order to receive coded digital stations, a Conditional Access Module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see page 5).

The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer.

Inserting the Smart Card into the CA module

Push the Smart Card into the CA module as far as it goes so that the side with the gold coloured contact chip is facing the side of the CA module marked with the provider's logo. Note the direction of the arrow printed on the Smart Card.

Inserting the CA module in the CI slot

Switch off the TV set's mains switch. Remove the cover from the rear of the set.

Ejector button

Cover

Carefully insert the CA module in CI slot 1 or CI slot 2 with the contact side forward.

If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process.

If the CA module is correctly installed, the ejector button protrudes a little further.

Switch on the TV set

The following dialogue appears:

 

 

 

 

Search wizard

END

 

Your TV set hast detected a new CA module. This requires a

 

station search for all new receivable station

 

 

 

Continue with OK

 

 

 

 

OK start the search wizard.

Check the recommended search routine parameters and then start the search.

Replace the cover.

Calling CA module information

This menu is only available for digital stations.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select CA module: xxx

(xxx corresponds to the CA module provider), OK to call information.

The content of this menu depends on the provider of the CA module.

Removing the CA module

Switch off the TV set's mains switch.

Remove the cover from the rear of the set.

Press in the ejector button on the appropriate module drawer, the module is released.

Remove the module from the set. Replace the cover.

Inserting the Smart Card into the CA module - 32

Page 32
Image 32
Loewe Spheros R 32 HD+ Conditional Access Module CA module, Inserting the Smart Card into the CA module, Call TV menu