Loewe Spheros R 37Full-HD+ Assignment of the digital audio input, Devices with DVI connection

Operating additional equipment

Assignment of the digital audio input

Your TV set can assign an AV input to the digital audio input socket AU- DIO DIGITAL IN. When switching over to this AV input, the digital audio signal at the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will hear the digital sound of the assigned AV input, if available, in place of the analogue sound.

Connecting devices to the digital audio input

You must feed the digital audio signal to the TV set for sound reproduc- tion from an external device, e.g. from the DVD player.

Reproduction of the external digital audio signal can be played back via the Dolby Digital Decoder integrated in the TV set or via an externally connected digital audio amplifier.

➠If an external audio amplifier is used, this must be regis- tered in the sound components wizard (see page 44).

Call TV menu.

34Select Connections,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Assign digital audio input,

6 go to the menu line below.

34Select AV input.

	TV menu
	Connections
	Miscellaneous			INFO	END
no	Assign digital audio input	to AV2	to AVS	to HDMI1/DVI	to HDM
	to AV1

To connect a DVD player to the digital audio input of the TV set for example, connect the digital output socket of the DVD player (DIGITAL OUT) via a cinch cable to the AUDIO DIGITAL IN socket on the TV set.

					TV set
				AUDIO DIGITAL IN
AV1
	MULTICHANNEL AUDIO OUT
	LEFT CENTER	LEFT			I
	REAR	FRONT			AUX-I/O
DIGITAL AUDIO OUT			STEREO OUT	VIDEO OUT
PCM/MPEG2/AC3/DTS
MAINS
					II
					TO TV-I/O
OPT OUT DIG OUT	RIGHT SUBW.	RIGHT	R L	(CVBS)	(Y/C)
	REAR	FRONT	AUDIO	VIDEO OUT	S-VIDEO OUT

DVD player

The DVD player is already registered at AV1 in the connection wizard at the factory.

If new devices are connected and registered in the connection wizard, the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard (see page 36).

Audio connection in HDMI (DVI) devices

Devices with DVI connection

If an external device with DVI interface is connected via a HDMI/DVI adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can connect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN.

The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left.

If you want to use the analogue sound of the external devices, connect it to the AUDIO IN2 socket.

Devices with HDMI connection

If external devices with HDMI interface are connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set, no assignment of the audio input is necessary because the digital transmission of picture and sound takes place via one connection in HDMI.

45 -