Lopi Liberty Wood Stove Stove Installation for qualified installers only, Travis Industries

14 Stove Installation (for qualified installers only)

Standard Ceiling with a Factory Built

Chimney Cap (See the section "Chimney

Termination Requirements" for more

Chimney Sections		}
Insulation	}
Follow the chimney
manufacturer's instructions
and clearances for floor
penetrations. A ceiling
support is required, an attic
insulation shield is required
where insulation is present.
Chimney Connector Sections

Floor Protection

(See the section "Floor Protection Requirements" for more details)

Follow the chimney manufacturer's instructions and clearances for roof penetrations. A storm collar and flashing are required (some require a radiation shield).

Minimum Air Space to Combustibles (See Chimney Manufacturer's Instructions - usually 2")

Minimum 15'

Maximum 33'

Stove Clearances (See the section "Stove Placement Requirements" for more details)

Figure 10

Cathedral Ceiling with a Factory Built Chimney

Chimney Cap
(See the section "Chimney
Termination Requirements"	}
for more details)
		Follow the chimney
Chimney Sections		manufacturer's instructions
		and clearances for roof
		penetrations. A storm
Minimum Air Space to		collar, flashing, and
Combustibles (See Chimney		cathedral-style chimney
Manufacturer's Instructions -		support are required
usually 2")		(some require a radiation
		shield).
Chimney		Minimum 15'
		Maximum 33'
Connector
Sections
Floor Protection		Stove Clearances
(See the section "Floor
		(See the section "Stove
Protection Requirements"
		Placement Requirements"
for more details)
		for more details)

Figure 11

© Travis Industries 100-01164 4041115