Record Method
This feature is used to select the DVR record method as either EVENT / NORMAL / OFF.
1.Press ▲ / ▼ to select the desired time camera channel
2.Press ◄ / ► to select the Record Method feature on the screen.
3.Press ▲ / ▼ to select EVENT/ NORMAL/ OFF on the screen.
EVENT: When the alarm input is triggered, the DVR will increase the recording time to that channel.
i.e. the normal record sequence for cameras is Camera 1, Camera 2, Camera 3 etc. In Event mode, when an alarm in triggered from channel 1, the DVR will record using the following sequence: Camera 1, Camera 2, Camera 1, Camera 3, Camera 1, Camera 4 etc.
NORMAL: When an External Audible Alarm is triggered, the DVR will record normally as set up.
OFF: An Alarm Trigger will not cause the DVR to start recording.
4.Press MENU to confirm and exit the Record Method feature.
5.Press MENU again to exit the Camera Setup Option
16
