STEP 4: ROUTER SETTING (Please refer to your Router manual for the configuration)
NOTE: In the router setting, there are four steps to follow:
1.Dial setting
2.DHCP setting
3.Virtual server setting
4.DDNS setting
1.Click on “INTERNET PORT” and choose your WAN type (e.g. PPPoE). Enter your “User Name” and “Password” to dial up the dynamic IP address. Press save after you set up.
SVC
2.Press “LOCAL PORT” and set “Start IP address” and “Number of IP address”. (For example, if the IP address of your Video Web Server is 192.168.1.10, then 10 is excluded from the setting range.) Press save after you finish setting up.
32
