Connecting the Camera
Installation Warnings:
•Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in
•Avoid installing the cameras where there are thick walls or obstructions between the Cameras and the Receiver*.
•Select a location for the camera that has an ambient temperature between 14°F~122°F
*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal structures. This will reduce the range of transmission.
Installing the Camera
To install the camera:
1.Use the included mounting screws to mount the stand to the mounting surface:
•Mark the position of the screw holes on the wall
•Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall | Figure 1.0 Attach stand to mounting surface |
using the provided screws |
|
2.Attach the camera to the mounting stand. Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews to secure the desired camera position.
3.Connect the power cable from the camera to the Power Adapter; plug the Power Adapter to an outlet or surge protector.
NOTE: You can add additional cameras (maximum of 4 cameras). When adding cameras that were not included in the original box, you will need to pair up the cameras with the receiver. Refer to the camera pairing section of this manual for more details.
Figure 1.1 Attach the camera to the stand
10
