LOREX Technology SG17L7584 instruction manual Sequence Set, Sequence SET

Sequence Set

Sequence Set

This submenu allows you to change the length of time a camera is displayed while the SEQUENCE (SEQ) feature is enabled. When in SEQUENCE mode, the observation monitor cy- cles through available cameras in the sequence shown below.

NOTE: If a camera is set to 0 SEC, it will be skipped in the AUTO SEQUENCING. Any channel without an attached camera will be skipped automatically.

1. QUAD-A- Shows cameras 1 - 4 in QUAD screen
mode. To change the length of display time, press
the K and L buttons to highlight, and press the OK	[SEQUENCE SET]
button to select the function. Press the K and L
buttons to change the number of display seconds,	QUAD-A	:	03 SEC
and press the OK button to accept the change
2. CH1 - CH4 - Shows cameras 1 - 4 in FULL	CH1	:	03 SEC
	CH2	:	03 SEC
SCREEN screen mode. To change the length of	CH3	:	03 SEC
display time, press the K and L buttons to highlight,
	CH4	:	03 SEC
and press the OK button to select the function.
	QUAD-B	:	03 SEC
Press the K and L buttons to change the number
of display seconds, and press the OK button to	CH5	:	03 SEC
accept the change	CH6	:	03 SEC
3. QUAD-B- Shows cameras 1 - 4 in QUAD screen	CH7	:	03 SEC
	CH8	:	03 SEC
mode. To change the length of display time, press
	RETURN	:	[  ]
the K and L buttons to highlight, and press the OK
button to select the function. Press the K and L	EXIT	:	[  ]
buttons to change the number of display seconds,
and press the OK button to accept the change

4.CH5 - CH8 - Shows cameras 1 - 4 in FULL

SCREEN screen mode. To change the length of display time, press the K and L buttons to highlight,

and press the OK button to select the function. Press the K and L buttons to change the number of display seconds, and press the OK button to accept the change

5.RETURN - Return to the MAIN MENU. Navigate by pressing the K and L buttons to highlight, and press the OK button to select

6.EXIT - Return to the camera view. Navigate by pressing the K and L buttons to highlight, and press the OK button to select

23